1. DH150-A Auto Bussing machine can automatically complete the busbar interconnection welding work in the middle of half-cell module, including the cutting and bending of the busbar and the welding of the ribbon and busbar.
2. Vacuum suction grabbing, welding in mid air
3. Position correction for 12 strings
4. rolled busbar feeding, automatically prepared and bending to L busbar.
5. Flux can be automatically added
6. Rotating arm operation screen, convenient and quick
7. The glass can be transported in both directions according to the requirements of the production line, without affecting the normal welding function
Product parameters:
|
Project |
Parameter |
|
Overall size |
Length×width×height: 5450×3673×2185 |
|
Production capacity |
150 panel/hour |
|
Welding method |
Electromagnetic induction welding |
|
Cell specifications |
156mm×156mm/5BB（12BB）--- 170mm×170mm/5BB（12BB） |
|
Cell thickness |
160μm |
|
Secondary calibration accuracy |
±0.3mm |
|
Module specifications |
Length(1630-2250)mm×Width(800-1100)mm; Center line right-angle bending type |
|
Glass specifications |
1642mm×984mm(156cells) ； 2250mm×1110mm(170cells) |
|
Busbar specification |
Rolled busbar feeding, Thickness 0.25-0.35mm, width 4, 5, 6, 8mm |
|
Module input and output height |
950±20mm |
|
Air source |
Pressure: 0.6-0.8MPa; Flow: 1.5m³/min; Specification of main pipe: inner diameter φ12/outer diameter φ16 |
|
Power supply |
Voltage: Three-phase (three-phase five-wire) 380V/220V Frequency: 50-60Hz; Power: peak value 15KW average 7KW |
|
Environment temperature |
10-40℃ |