1. DH150-B Auto Bussing machine can complete both ends busbar welding of center outlet lines symmetrical type of half cell module, or it can be used independently to complete the busbar preparation of the standard type and double glass type of the full cell, the welding of interconnecting busbar and the preparation, cutting and placement of EPE film.
2. Rolled busbar feeding, L busbar automatic lapping and welding.
3. Automatically complete the cutting and placement of EPE block film
and lEPE long bar insulation film.
4. Flux can be sprayed automatically on the welding area before welding.
5. The feeding device of the busbar and the flux insulation film are all on the same side of the machine
6. Rotating arm operation computer, convenient and quick
7. The glass can be transported in both directions according to the requirements of the production line, without affecting the normal welding function
|
Project |
Parameter |
|
Overall size |
Length×width×height: 6203×3777×2557 |
|
Production capacity |
150 panel/hour |
|
Welding method |
Electromagnetic induction welding |
|
Cell specifications |
156mm×156mm/5BB（12BB）--- 170mm×170mm/5BB（12BB） |
|
Cell thickness |
160μm |
|
Module specifications |
Length (1630-2250)mm×Width(800-1100)mm B1(normal)、B2(double glass)、B3(三分體)B4(double side B) |
|
Glass specifications |
1642mm×984mm(156cell) 2250mm×1110mm(170cell) |
|
Busbar specification |
Roll feed, thickness 0.25-0.35mm, width 4, 5, 6, 8mm |
|
EPE film specifications |
Rolled busbar feeding, thickness ≥200μm, Wide film width 70mm, narrow film width 30mm |
|
Module input and output height |
950±20mm |
|
Gas source |
Pressure: 0.6-0.8MPa; Flow rate: 1.8m³/min; Main pipe specifications: inner diameter φ12/outer diameter φ16 |
|
power supply |
Voltage: Three-phase (three-phase five-wire) 380V/220V Frequency: 50-60Hz Power：Peak 32KW Average23KW |
|
Environment temperature |
10-40℃ |