Product Features:
1. Cycle time≤17S/module, high speed.
2. Complete the preparation of the half-cell middle-outlet symmetrical assembly bus bar and the welding function of the bus bar and the soldering bus bar at both ends of the cell string.
3. Strong compatibility: Compatible with 1/2 cell 6 strings and 1/3 cell 6 strings soldering.
4. Conventional half-cell cycle time ≤17S;
After open single jumper, double jumper bypass welding cycle time20S;
After open single jumper, double jumper bypass welding cycle time 24S.
5. The weight of the raw material roll can reach 30KG (optional), which can reduce the downtime and refill time.
6. Perform secondary correction on the positions of 10/12 half-cell strings respectively, vacuum adsorption grabs the cell strings, one-time-in the air and precise soldering.
7. The specification conversion is convenient.
8. The bottom-mounted welding head is convenient for specification conversion and adjustment, reducing the false welding rate.
9. Possess the function of punching the end of the bus bar.
10. Single side feeding, easy to operate.
Product parameters：
|
Project |
Parameter |
|
Cell specification |
166*166mm—230*230mm 1/2 |
|
Main busbar qty. |
9BB—20BB |
|
Soldering method |
Electromagnetic soldering |
|
Cycle time |
17S/module |
|
Glass Specification |
L(1630mm-2650mm) W（980mm一1500mm） |
|
Bus bar specification |
Thickness (0.18-0.45mm) width（4一8mm） |
|
Flux spray method |
High frequency pulse spraying |
|
Optional item |
Optional single jumper (with film): 210*210-230*230 Cells: 5 strings*10 half-cell*2, 5 strings*15 1/3 cell*2, chip spacing 1-4mm, string spacing 1-6mm ; (bypass bus bar string spacing ≥ 10mm (4mm bus bar) ) Optional double jumper (with film): 156*156-210*210 bypass bus with string spacing ≥ 10mm (4mm bus with) and small L lead |
|
Dimension |
(L*W*H)5166* 4853*2690mm |
|
Power source |
Three-phase five wire 380/220V 50/60Hz |
|
Power |
Average value about 20KW/peak value 30KW |
|
Air source |
Pressure 0.6-0.8MPa flow rate 2.0m³/min |